-40%

Import Nitrous Oxide Wet Kit 4&6 CYL NEW! NOS NX CIVIC honda mazda subaru toyota

$ 231.79

Availability: 26 in stock
  • Brand: DynoTune
  • Condition: New
  • Manufacturer Part Number: DynoTune
  • Returns Accepted: ReturnsNotAccepted

    Description

    This auction is for one new DynoTune
    4&6 cyl IMPORT wet nitrous oxide system for EFI applications.
    This System will work on all cars and comes complete with all the parts and instructions needed to install on any 4 and 6 cylinder EFI engine. The system is good for up to an additional 75 HP increase (up to 175HP with diffrent jets).
    This EFI wet Kit is the most complete kit available all the way down to the Tap for the nozzle. Quality stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass. Please compare part per part against the competion, the DynoTune kit is complete!
    This DynoTune Nitrous kit is tuned for Safe reliable Horsepower increase. More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer.
    Isn’t it time you made the switch?
    NOTE: Do not use any chips or devices that will advance the ignition timing beyond stock. An increase in Octane or Octane boost may be required for your application.
    The Kit contains the following:
    10lb Gloss Black bottle with high flow valve
    4AN bottle nut & Teflon washer
    Stainless quick connect Bottle brackets and hardware
    16 foot braided stainless feed line, blue fittings
    Solenoid mounting bracket with hardware
    High Flow Nitrous solenoid
    2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings and a Braided stainless line for Fuel rail test port installation, red fitting
    Jets for 35, 50 and 75HP(max 175hp with diffrent jet)
    High flow Wet Nozzle
    1/16" NPT Nozzle tap for taping into aluminum or thick plastic
    5/16" fuel injection hose with clamps and brass "T", all fittings and clamps for a complete installation
    Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap!
    Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..
    Micro throttle activation switch and mounting bracket
    Our 18 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for all wet fuel injection applications