SAAB 900 CLASSIC chrome bumper trim aero convertible spg t16s injection turbo

Description

IMPROVED CHROME TRIM - A LITTLE FLATTER THAN THE PREVIOUS TRIM THAT WAS SO POPULAR
IMPORTANT TO KEEP TRIM IN A WARM PLACE AND TO HEAT UP THE BACKING TAPE BEFORE APPLICATION
MAKE SURE THERE IS NO GRIME OR BACK TO BLACK SILICONE FINISH NEAR THE STICKING SURFACE
Price is per metre ... let me know how much you need... 1m = approx 3.3 ft
Picture is on a CLASSIC 900 T16S    the width and it is spot on for ALL C900 with the thicker trim 1981 - 1993
apparently there were a few early models with a 6mm trim
Convertible
Hatchback
Sedan
Including early flat front models
You will need 3m for the two front corners as they just over 2m but the excess will do the two sides
The rear bumper is approx 2 m
The rear sides are 1m for the pair
5m should do the whole car
This is the correct width ..nice tight fit ... and self adhesive
clean the bumper with white spirit or methylated spirits to remove the silicones before applying
I have sold many hundreds of metres because this is the correct width and not nearly correct
I can be contacted until 10.00pm most evenings and weekends for support or advice
Best wishes Steve