SPRING LOADED PCD DIAMOND DRAG ENGRAVING TOOL CNC

Description

DESCRIPTION
SPRING LOADED ENGRAVING TOOL BIT HOLDER INCLUDING
DIAMOND PCD DRAG ENGRAVING BIT AND 2 CUSTOM SPRINGS

PLEASE READ COMPLETE DESCRIPTION BEFORE PURCHASE - YOU WILL FIND IT VERY HELPFUL
This is my brand new updated spring loaded drag engraving tool. It can be used on any engraving machine that has a
7mm collet
. Most table CNC machines use an
ER11
collet, larger ER16 or ER22. So If your machine does not have a
7mm collet
you just need to purchase one.
7mm collet
can be easily found on eBay and is
VERY cheap.
WHY 7mm COLLET?
During my cooperation with
Rogaska Crystal
,
Fiskars
and
MontBlanc
we tested MANY, MANY, MANY engraving tools I made specially for them and made about 50 modifications on spring engraver and finally we came to conclusion that 7mm diameter is smallest possible diameter to handle all forces during metal engraving process. Standard 1/4 inch dia tool would be fine, but is just made on the limit. So why to damage precise tool if 7mm collets are widely available for same price as standard 1/4 inch.
ENGRAVING TOOL COMES WITH 2 SPRINGS
1 for soft material engraving (like gold, copper, etc.) and
1 spring for hard material engraving (steel, SS HRC,...)
and
1PC POLYCHRISTALINE CARBIDE PCD 1/8¨ 60 DEGREE ENGRAVING TIP
If you are engraving different materials thats the right bit for you.
Do not be fooled with diamond engraving bits, these are only for special purposes and if you run them within different materials you will break them realy fast. Also results on most materials are same or worse than with PCD bits. Before you purchase I advice you to ALWAYS educate yourself as knowledge is key to good results!
"First and foremost, think of PCD as the marathon runner, as it will yield the best results in continuous and steady cutting of homogeneous materials.  Diamond tooling is not advisable as an all-round tool that will be required to meet demands of a wide range of cutting applications on a day to day basis.  So, if you are engraving different materials and want one tool to do it all, the diamond tool will not be able to excel as well as it will if you are engraving, for instance, 3/4″ MDF all day long." - review by professional tool manufacturer Guhdo tools
BE SMART
, do not purchase cheapest or most expensive engraving bits available as they are not made for everybody - you can have problems because low quality bits dia are not exactly 3.175mm (1/8 inch), but you will overpay for diamond bits and have same results as with PCD!
Do I even have to say that using diamond bits to engrave other than Crystal, Glass or Ceramics is just crazy
.
The toughness of
diamond
is about 2.0 MPa which is good compared to other gemstones, but poor compared to most engineering materials like PCD. So if I take a hammer and hit a hammer hard, yeah diamond gonna
break
.
If you use my engraving tool with original PCD engraving tips, you will get engraving
tolerance
0,008mm on all materials!
I do sell spare PCD diamond engraving tips for only 9,95$.
(
Check out my other items
)
Engraving Mercedes emblem with spring engraver
Video will open in a new window
WHAT TO EXPECT:
With my engraving tool you will be able to do very detailed engravings on uneven surfaces and the engraving remains even. The holder's small size offers "many great advantages" over other "larger" and/or "longer" spring loaded holders that need to extend far beyond the spindle nose resulting in "excessive tool tip run out". The small size of my engraving tool holders makes these the most versatile engraving tools available… BUT they are VERY hard to manufacture due to small parts and needed accuracy!
SPECIFICATION:
The tool has a precision ground
7mm dia HRC stainless steel body
compatible with any
1/8" (3.175mm) engraving bit.
The
overall length is approx. 2" (50mm)
& there is
up to 1/4" (7mm) travel
.
ENGRAVING ADJUSTMENTS (FORCE):
engraving tool has a linear adjustable engraving force using an M5 screw. Tests were made engraving on the aluminum glass, steel, silver and gold but the engraving tool can also be used with many other materials.
2018 UPGRADE:
Due to questions if you can use my tool for gold engraving, silver and other materials, I did upgrade this tool with
two customs springs.
One that will cause smaller engraving force and other larger engraving force. That way you can engrave all materials from extra soft like gold, up to stainless steel HRC.
WHATS INCLUDED
1pc spring engraver tool,
1pc 60° Polycarbide Diamond PCD Engraving Tip,
2 custom springs that make tool possible to engrave all materials
Tools are made in my own machine shop & each one is assembled, inspected and tested before packaging.
Each tool comes with
100% MONEY BACK GUARANTEE
!
I do accept also custom orders (contact me).
SHIPPING
I do ship from Europe (German or Slovenian location).
Shipping overseas (USA, AUSTRALIA, CANADA, CHINA) without any additional expenses
!!! NO additional import costs worldwide !!!
in case import costs arise I will cover complete import and customs procedure charges.
Shipping only with priority air mail, USPS, Deutsche post or FEDEX. Please understand, I do ship within 3 working day after payment received, I choose fastest reasonable priced shipping option but that is all I can do, shipping time does not depend on me!
If you have any questions about quality
please look at my tool feedback
:
Thank you for your time!
Henrich H.